FREE ENGINEERING FAULTY PROJECT TOPICS AND MATERIALS

FREE ENGINEERING FAULTY PROJECT TOPICS AND MATERIALS

ENGINEERING FAULTY PROJECT TOPICS AND MATERIALS

1. RELIABILITY-BASED ANALYSIS OF COMPOSITE SOLID SLENDER TIMBER COLUMNS WITH ALUMINIUM LAMINATES USING SELECTED NIGERIAN TIMBER SPECIES

2. MULTIVARIATE ANALYSIS OF THE WATER QUALITY INTHE MIDDLE STRETCH OF RIVER KADUNA (MALALI – RIGASA)

3. ASSESSMENT OF MUNICIPAL SOLID WASTE IMPACT ON GROUNDWATER QUALITY OF SOME SELECTED AREAS IN MAIDUGURI, NIGERIA

4. DEVELOPMENT OF A SHUNT ACTIVE POWER FILTER FOR HARMONIC REDUCTION USING SYNCHRONOUS REFERENCE FRAME WITH SPACE VECTOR PULSE WIDTH MODULATION

5. DEVELOPMENT OF A FUZZY TIME SERIES MODEL USING CAT SWARM OPTIMIZATION CLUSTERING AND OPTIMIZED WEIGHTS OF FUZZY RELATIONS

6. DEVELOPMENT OF A DEEP LEARNING BASED VEHICLE LICENSE PLATE DETECTION SCHEME

7. EFFECTIVE TRAINING AS A TOOL FOR IMPROVING BUILDING SERVICES IN ENGINEERING PRACTICE

8. DEVELOPMENT OF A DISTRIBUTED BIG DATA FUSION ARCHITECTURE FOR MACHINE-TO-MACHINE COMMUNICATION USING ENSEMBLE LEARNING

9. DEVELOPMENT OF A STATE ESTIMATION BASED IMPROVED DETECTION AND LOCALIZATION OF NON-TECHNICAL LOSSES USING SMART METER MEASUREMENTS

10. SYNTHESIS, FORMULATION AND CHARACTERIZATION OF PHENOL FORMALDEHYDE/CHITOSAN COMPOSITES

11. QUALITY OF SANDCRETE HOLLOW BLOCKS IN PLATEAU STATE

12. DEVELOPMENT OF AN IMPROVED FORCED ISLAND AND LOAD SHEDDING SCHEME TO PREVENT SYSTEM COLLAPSE

13. EFFECT OF CRUSHED COCONUT SHELL AND POLYETHYLENE TEREPHTHALATE AS PARTIAL REPLACEMENT OF COARSE AGGREGATE IN CONCRETE.

14. OPTIMISING PATIENTS FLOW AND RESOURCES UTILISATION IN THE OUT-PATIENT DEPARTMENT OF A PUBLIC HOSPITAL A CASE STUDY OF YUSUF DANTSOHO MEMORIAL HOPITAL KADUNA

15. DEVELOPMENT OF AN IMPROVED APPLICATION SPECIFIC TUNELLING PROTOCOL SELECTION SCHEME FOR SITE TO SITE VIRTUAL PRIVATE NETWORKS

16. DEVELOPMENT OF A ROBUST DIGITAL IMAGE WATERMARKING TECHNIQUE IN DISCRETE ORTHONORMAL STOCKWELL TRANSFORM DOMAIN BASED ON PHOTON POLARIZATION

17. DEVELOPMENT OF AN OPTIMIZED ROUTING SCHEME FOR A CAPACITATED VEHICLE MODEL

18. A HYBRID GENETIC-ARTIFICIAL FISH SWARM ALGORITHM FOR ECONOMIC LOAD DISPATCH WITH VALVE-POINT AND MULTIPLE FUEL EFFECTS

19. FLOOD RISK ASSESSMENT OF OFU RIVER CATCHMENT IN NIGERIA

20. DEVELOPMENT OF AN IMPROVED MULTI-HOP ROUTING PROTOCOL IN WIRELESS SENSOR NETWORKS BASED ON CLUSTER HEAD LOAD BALANCING TECHNIQUE

21. SIMULATION, DEVELOPMENT AND PERFORMANCE EVALUATION OF A SOLAR/GAS HYBRID POWERED ABSORPTION AIR – CONDITIONING SYSTEM

22. GEOGRAPHICAL INFORMATION SYSTEM BASED HYDROLOGICAL MODELLING OF CLIMATE CHANGE VARIABLES ON HADEJIA RIVER SUB-BASIN, NIGERIA

23. SUITABILITY OF SNAIL SHELL PARTICLES AS AN ENERGIZER FOR CARBURIZING MILD STEEL

24. DEVELOPMENT OF A SENSITIVITY INDEX BASED TECHNIQUE FOR UNIFIED POWER FLOW CONTROLLER PLACEMENT WITH CONTINGENCY ANALYSIS ON NIGERIA 330kV TRANSMISSION NETWORK

25. EVALUATION OF PULVERIZED COCONUT SHELL CHARCOAL AND PERIWINKLE SHELL FOR CARBURIZING MILD STEEL

26. DESIGN, CONSTRUCTION AND TESTING OF AN IMPROVED CASTING POURING LADLE

27. DEVELOPMENT OF A SMELL AGENT OPTIMIZATION ALGORITHM FOR COMBINATORIAL OPTIMIZATION PROBLEMS

28. DEVELOPMENT AND CHARACTERIZATION OF BIOCOMPOSITES FROM POLYLACTIC ACID AND GROUNDNUT SHELL ASH NANOPARTICLES

29. DEVELOPMENT AND CHARACTERISATION OF EPOXY/BORASSUS PALM (Borassus aethiopum Mart.) LEAF STALK FIBRE REINFORCED COMPOSITE

30. DESIGN, DEVELOPMENT AND PERFORMANCE EVALUATION OF A MULTIPLE SANDCRETE BLOCKS MOULDING MACHINE

31. DEVELOPMENT OF AN IMPROVED FORCED ISLAND AND LOAD SHEDDING SCHEME TO PREVENT SYSTEM COLLAPSE

32. DEVELOPMENT OF A MODIFIED FRUIT FLY OPTIMIZATION ALGORITHM BASED LINEAR QUADRATIC REGULATOR CONTROLLER FOR AIRCRAFT PITCH CONTROL SYSTEM

33. EFFECT OF DATE SEED POWDER FILLER ON PROPERTIES OF HIGH-DENSITY POLYETHYLENE

34. RELIABILITY ASSESSMENT OF THE STRENGTH CAPACITY OF SOLID TIMBER COLUMNS IN FRP LAMINATES AND SPRAYS

35. THE EFFECT OF COMMUNITY SANITATION PRACTICE ON WATER QUALITY IN SELECTED COMMUNITIES IN JALINGO, TARABA STATE, NIGERIA

36. RECOVERY OF VALUE METALS FROM SPENT ZINC-CARBON BATTERIES

37. PROBABILISTIC ANALYSIS OF REINFORCED CONCRETE COLUMNS SUBJECTED TO CORROSION

38. EFFECT OF DEFICIT IRRIGATION AND MULCH MATERIALS ON CROP YIELD AND WATER USE OF CUCUMBER (Cucumis sativus L.) IN SAMARU, NIGERIA

39. MODELLING OF WATER QUALITY DETERIORATION IN THE DISTRIBUTION NETWORK OF KADUNA METROPOLIS USING MATLAB

40. DYNAMIC MODEL DEVELOPMENT AND RECEDING HORIZON CONTROL OF BLOOD GLUCOSE CONCENTRATION

41. SUITABILITY OF OSARA AND JAMATA RIVER SAND DEPOSITS FOR MOULDING OPERATION

42. IMPROVING FAIRNESS IN LOAD BALANCING AMONG RADIO ACCESS TECHNOLOGIES IN HETEROGENEOUS WIRELESS NETWORK

43. DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF A FIXED BED PYROLYSIS SYSTEM

44. DEVELOPMENT OF MONARCH BUTTERFLY OPTIMIZATION ALGORITHM FOR ECONOMIC LOAD DISPATCH SOLUTION

45. FURFURAL PRODUCTION FROM MICROALGAE

46. EVALUATION OF YIELD AND SOIL WATER BALANCE OF TWO COWPEA VARIETIES UNDER DEFICIT IRRIGATION AND MULCH IN A WEIGHING-TYPE MICRO LYSIMETER

47. DEVELOPMENT OF AN ADAPTIVE TRACKING AREA LIST LOCATION MANAGEMENT SCHEME IN LONG TERM EVOLUTION (LTE) NETWORKS

48. APPLICATION OF BAT ALGORITHM-BASED METHOD FOR MULTI-OBJECTIVE OPTIMAL NETWORK RECONFIGURATION AND DISTRIBUTED GENERATION PLACEMENT IN RADIAL DISTRIBUTION NETWORK

49. ASSESSMENT OF THE HYDROPOWER POTENTIAL OF GORONYO DAM IN SOKOTO STATE, NIGERIA

50. COMPARATIVE STUDIES OF THE PERFORMANCE OF FILTER MEDIA MADE USING BIOCHAR AND ACTIVATED CARBON IN GREYWATER REMEDIATION

51. DEVELOPMENT OF A MODIFIED REAL-TIME FAULT-TOLERANT TASK ALLOCATION SCHEME FOR WIRELESS SENSOR NETWORKS

52. FAILURE EVALUATION OF ENGINEERING PROJECTS IN NIGERIA (A CASE STUDY OF PIPELINE AND PRODUCT MARKETING COMPANY LIMITED, A SUBSIDIARY OF NIGERIAN NATIONAL PETROLEUM CORPORATION)

53. DEVELOPMENT OF A DYNAMIC OUTPUT-FEEDBACK REGULATOR FOR STABILIZATION AND TRACKING OF NON-SQUARE MULTI-INPUT MULTI-OUTPUT SYSTEMS

54. A COMBINED BIOGAS PLANT AND INCINERATOR SYSTEM FOR MUNICIPAL SOLID WASTE MANAGEMENT

55. DEVELOPMENT OF A PILOT ALLOCATION PROTOCOL TO MITIGATE THE EFFECT OF PILOT CONTAMINATION IN MASSIVE MULTIPLE INPUT MULTIPLE OUTPUT SYSTEM

56. DESIGN OF WATER SUPPLY (COLD AND HOT) SYSTEM OF A THREE BEDROOM BUNGALOW WITH ADEQUATE PRESSURE

57. ASSESSMENT OF SAWDUST ACTIVATED CARBON (SAC) IN THE TREATMENT OF AQUACULTURE EFFLUENT

58. DEVELOPMENT OF A MODIFIED EAST-WEST INTERFACE FOR DISTRIBUTED CONTROL PLANE IN SOFTWARE DEFINED NETWORK FOR WIDE AREA NETWORKS

59. DEVELOPMENT OF A MODIFIED ENERGY-EFFICIENT CLUSTERING WITH SPLITTING AND MERGING FOR WIRELESS SENSOR NETWORKS USING CLUSTER-HEAD HANDOVER MECHANISM

60. DEVELOPMENT OF A MODIFIED ARTIFICIAL FISH SWARM ALGORITHM PARTIAL TRANSMIT SEQUENCE TECHNIQUE FOR PEAK TO AVERAGE POWER RATIO REDUCTION IN ORTHOGONAL FREQUENCY DIVISION MULTIPLEXING

61. DESIGN AND USE OF A MODEL CONSTRUCTED HORIZONTAL SUBSURFACE FLOW WETLAND FOR TREATING TANNERY WASTEWATER BY MEANS OF AQUATIC PLANTS

62. A CUCKOO SEARCH BASED CO-ORDINATION OF DISTRIBUTED GENERATION UNITS AND SHUNT CAPACITOR BANK IN RADIAL DISTRIBUTION NETWORKS

63. DEVELOPMENT OF PILOT SIZE PROCESS FOR ZEOLITE Y AND ZSM-5 PRODUCTION FROM KANKARA KAOLIN

64. THE EFFECT OF PERIWINKLE SHELL ASH AND DUST ON THE COMPRESSIVE STRENGTH OF CONCRETE

65. DEVELOPMENT OF FIREFLY ALGORITHM BASED METHOD FOR DISTRIBUTED GENERATION PLANNING IN AN UNBALANCED THREE-PHASE DISTRIBUTION NETWORK USING VOLTAGE STABILITY INDEX

66. DEVELOPMENT OF CONCEPTUAL MODELS FOR PLANTS AND EQUIPMENT PROCUREMENT IN TERTIARY INSTITUTIONS IN KADUNA STATE

67. DEVELOPMENT OF AN IMPROVED SHORT-TERM PEAK LOAD FORECASTING MODEL BASED ON SEASONAL AUTOREGRESSIVE INTEGRATED MOVING AVERAGE AND NONLINEAR AUTOREGRESSIVE NEURAL NETWORK FOR NIGERIA POWER SYSTEM GRID

68. DEVELOPMENT OF A MODIFIED TOKEN BASED CONGESTION CONTROL SCHEME WITH ADAPTIVE FORWARDING FOR OPPORTUNISTIC NETWORK

69. MODAL ANALYSIS OF VERTICALLY CURVED CONCRETE FLYOVER BRIDGES

70. DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR BOX COOKER

71. DEVELOPMENT AND CHARACTERISATION OF EPOXY/BORASSUS PALM (Borassus aethiopum Mart.) LEAF STALKFIBRE REINFORCED COMPOSITE

72. THE EVALUATION OF CERAMIC WASTE AS PARTIAL REPLACEMENT OF COARSE AGGREGATE IN HOT MIX ASPHALT

73. DEVELOPMENT OF AN IMPROVED EXTENDED DIJKSTRA ALGORITHM FOR SOFTWARE DEFINED NETWORKS

74. EFFECTS OF FIBRE HYBRIDIZATION ON THE PROPERTIES OF NATURAL FIBRE FILLED EPOXY COMPOSITES

75. DEVELOPMENT OF AN IMPROVED ALGORITHM FOR POWER LINE DETECTION IN OPTICAL IMAGES USING FRANGI FILTER AND FIRST ORDER DERIVATIVE OF GAUSSIAN

76. BITUMEN STABILIZATION OF LATERITE PRETREATED WITH HEAT AS A FLEXIBLE PAVEMENT MATERIAL

77. A COMBINED BIOGAS PLANT AND INCINERATOR SYSTEM FOR MUNICIPAL SOLID WASTE MANAGEMENT

78. PRODUCTION AND PERFORMANCE EVALUATION OF BIODEGRADABLE GREASE (BIOGREASE) FROM Balanites aegyptiaca (DESERT DATE) SEED OIL

79. PREVALENCE OF SCHISTOSOMIASIS AMONG PRIMARY SCHOOL CHILDREN IN DAKACE DISTRICT, ZARIA LOCAL GOVERNMENT AREA, KADUNA STATE, NIGERIA

80. DEVELOPMENT AND OPTIMIZATION OF THE THRESHING PERFORMANCE OF A MULTICROP THRESHER

81. DEVELOPMENT OF TRANSITIONAL PROBABILITY MATRIX MODEL FOR PAVEMENT DESIGN

82. HARMONICS MITIGATION ON VARIABLE FREQUENCY DRIVE USING SINGLE PHASE SHUNT ACTIVE POWER FILTER CONTROLLED BY ARTIFICIAL NEURAL NETWORK A CASE STUDY OF KILN UNIT OF DANGOTE CEMENT PLANT OBAJANA

83. DEVELOPMENT OF EUCALPYTUS TERETICORNIS COMPOSITE (BARKS AND LEAVES) ADSORBENT FOR ADSORPTION OF CHROMIUM (VI) AND LEAD (II) IONS FROM SIMULATED WASTEWATER

84. DEVELOPMENT OF BAOBAB/SISAL REINFORCED LOW DENSITY POLYETHYLENE HYBRID COMPOSITE

85. DEVELOPMENT OF A VIDEO FRAME ENHANCEMENT TECHNIQUE BASED ON PIXEL INTENSITY AND HISTOGRAM DISTRIBUTION FOR IMPROVED COMPRESSION

86. MODIFICATION, CHARACTERISATION AND APPLICATION OF COCONUT WASTES AS FILLERS IN RUBBER COMPOUNDING

87. MODELLING AND STRUCTURAL ANALYSIS OF THE BALL-ON-SPHERE SYSTEM USING BOND GRAPH TECHNIQUE

88. DEVELOPMENT OF DEFICIT IRRIGATION SCHEDULLING STRATEGIES FOR MAIZE CROP UNDER GRAVITY-DRIP IRRIGATION SYSTEM

89. DEVELOPMENT OF AN OPTIMAL EXTRACTED FEATURE CLASSIFICATION SCHEME IN VOICE RECOGNITION SYSTEM USING DYNAMIC CUCKOO SEARCH ALGORITHM

90. DEVELOPMENT OF A DISCRETE-FIREFLY ALGORITHM BASED FEATURE SELECTION SCHEME FOR IMPROVED FACE RECOGNITION

91. INVESTIGATION OF THE THERMAL PROPERTIES OF WOOD ASH AND CLAY-SAWDUST MIXTURE FOR USE AS INSULATION MATERIALS IN A ROCKET STOVE

92. DEPURATION STUDIES ON KADUNA REFINERY WASTEWATER USING MODIFIED Cu-DOPED GOETHITE CATALYST

93. BACTERIAL FORAGING ALGORITHM BASED TUNING OF ON-LOAD TAP CHANGING TRANSFORMER FOR VOLTAGE REGULATION IN POWER TRANSMISSION NETWORK

94. DEVELOPMENT OF AUTOMOBILE DISK BRAKE PADS USING ECO-FRIENDLY PERIWINKLE SHELL AND FAN PALM SHELL MATERIALS

95. DEVELOPMENT OF AN ACCEPTABLE USE POLICY FRAMEWORK FOR IBBUL COMMUNICATION NETWORK

96. DESIGN, CONSTRUCTION AND TESTING OF A FLUIDISED BED COMBUSTION BOILER FOR ENERGY PRODUCTION

97. DEVELOPMENT OF A CLONAL SELECTION ALGORITHM BASED SYSTEM FOR AUTOMATIC DETECTION OF MULTIPLE SHAPES

98. DEVELOPMENT AND PERFORMANCE OPTIMISATION OF A TWO-ROW ENGINE-PROPELLED SEEDRIDGE PLANTER

99. DETERMINATION OF AN IMPROVED SPECTRUM SENSING THRESHOLD FOR COGNITIVE RADIO USING SMOOTHED PSEUDO WIGNER-VILLE DISTRIBUTION

100. BITUMINOUS STABILIZATION OF LATERITE MODIFIED WITH LIME FOR USE AS PAVEMENT MATERIALS

101. PERFORMANCE EVALUATION OF MINI SPRINKLER IRRIGATION SYSTEM: COMPARISON OF THE PLASTIC AND IRON MADE SPRINKLER SYSTEM

102. DESIGN AND FABRICATION OF AIR SAMPLER IN AIR QUALITY ASSESSMENT FOR SELECTED HEAVY METALS IN KADUNA METROPOLIS

103. DEVELOPMENT OF A TRAFFIC LIGHT CONTROLLER MODEL USING ARTIFICIAL BEE COLONY BASED ADAPTIVE DYNAMIC SCHEDULING ALGORITHM

104. RESPONSE TIME IMPROVEMENT ON ONE TIME PASSWORD (OTP) TECHNIQUE TO PREVENT REPLAY ATTACK IN A RADIUS ENVIRONMENT.

105. DEVELOPMENT OF AN ARTIFICIAL FISH SWARM ALGORITHM BASED ENERGY EFFICIENT TARGET TRACKING SCHEME IN WIRELESS SENSOR NETWORKS

106. KINETIC STUDIES ON GLUCOSE PRODUCTION FROM ELEPHANT GRASS (Pennisetum purpureum)

107. CEMENT STABILIZATION OF LATERITIC SOIL USING IRON ORE TAILING AS ADMIXTURE

108. EVALUATION OF THE FACTORS AFFECTING THE SELF-PURIFICATION CAPACITY OF RIVER KADUNA, NIGERIA.

109. IMPROVED MODELLING OF HARMATTAN DUST EFFECT ON THE CROSS POLARIZATION OF A MICROWAVE ACCESS RADIO LINK OPERATING BETWEEN 15GHz AND 38GHz 

110. MODELING AND SIMULATION OF COMPACT FLUORESCENT LAMP FOR THE ANALYSIS AND MITIGATION OF HARMONICS INJECTION INTO POWER DISTRIBUTION NETWORK

111. MODELLING AND SIMULATION OF BIODIESEL BLENDS PERFORMANCE IN COMPRESSION IGNITION ENGINES

112. THE USE OF SELECTED PLANT EXTRACTS IN GREY- WATER TREATMENT

113. MODELLING AND OPTIMIZATION OF PID CONTROLLER’s PARAMETERS FOR DEEP SPACE ANTENNA POSITIONING SYSTEM USING GENETIC ALGORITHM

114. DEVELOPMENT OF AN IMPROVED FRAME LEVEL REDUNDANCY SCRUBBING ALGORITHM FOR STATIC RANDOM ACCESS MEMORY BASED FIELD PROGRAMMABLE GATE ARRAY

115. EVALUATION OF NOISE LEVELS FROM VARIOUS SOURCES WITHIN ZARIA METROPOLIS, KADUNA STATE, NIGERIA

116. STUDYING THE OPTIMAL CONDITIONS FOR GLUCOSE AND BIO-ETHANOL PRODUCTION FROM SPIROGYRA AFRICANA

117. EVALUATION OF SOME NIGERIAN VEGETABLE OILS AS LUBRICANTS IN DEEP DRAWING OPERATIONS

118. EVALUATION OF PLANTAIN PEEL ASH AS A MIXTURE

119. INVESTIGATION OF CREEP BEHAVIOUR OF BLACK AFARA (Terminalia ivorensis) TIMBER

120. POTENTIAL OF SESAME OIL (Sesanum indicum) BATH AS AN AUSTEMPERING MEDIUM FOR DUCTILE CAST IRON

121. MODIFICATION AND PERFORMANCE EVALUATION OF AN IMPROVED SOYABEAN THRESHER

122. DEVELOPMENT AND PERFORMANCE EVALUATION OF HYDRAULIC PISTON PRESS BIOMASS HOLLOW BRIQUETTE MAKING MACHINE

123. DEVELOPMENT OF AN IMPROVED INTRUSION DETECTION BASED SECURED ROBUST HEADER COMPRESSION TECHNIQUE

124. EFFECTS OF ADDITIVES ON BIOGAS PRODUCTION FROM COW DUNG AND CHICKEN DROPPING MIXED WITH DIGITARIA SMUTS II

125. APPLICATION OF IMPROVED BACTERIAL FORAGING ALGORITHM TO THE OPTIMAL SITING AND SIZING OF D-STATCOM IN RADIAL DISTRIBUTION NETWORKS

126. APPLICATION OF IMPROVED BACTERIAL FORAGING ALGORITHM TO THE OPTIMAL SITING AND SIZING OF D-STATCOM IN RADIAL DISTRIBUTION NETWORKS

127.  SCALABILITY EVALUATION AND IMPROVEMENT IN IP-BASED CAMPUS NETWORKS: A CASE STUDY OF AHMADU BELLO UNIVERSITY ZARIA NETWORK

128. ASSESSMENT OF THE PERFORMANCE OF WATER SUPPLY SERVICE IN KADUNA NORTH WATER WORKS

129. PERFORMANCE ENHANCEMENT OF WATER SUPPLY DISTRIBUTION IN MINNA METROPOLIS

130. PRODUCTION OF BIOGAS FROM CO-DIGESTION OF COW DUNG, HORSE DUNG AND CHICKEN FEATHER

131. ASSESSMENT OF HEAVY METALS IN SOME SELECTED VEGETABLE FIELDS IRRIGATED WITH WASTE WATER ALONG KUBANNI WATER COURSE IN ZARIA METROPOLIS

132. INVESTIGATING THE SYNERGISTIC EFFECTS OF MORINGA OLEIFERA SEED CAKE EXTRACT AND OPUNTIA STRICTA (CACTUS) MUCILAGE IN SURFACE WATER TREATMENT

133. MODIFIED KAOLINITE CLAY AS CATALYST FOR BIODIESEL PRODUCTION FROM WASTE COOKING OIL

134. SYNTHESIS AND APPLICATION OF POTASSIUM FLUORIDE/EGGSHELL-IRON (II, III) OXIDE CATALYST FOR SINGLE STAGE TRANSESTERIFICATION OF NEEM OIL

135. EXPERIMENTAL AND PROBABILISTIC ASSESSMENT OF CONCRETE INCORPORATING EXPANDED POLYSTYRENE (EPS) WASTE AT ELEVATED TEMPERATURES

136. EFFECTS OF COPPER ADDITION AND SECTION THICKNESS ON SOME MECHANICAL PROPERTIES AND THE MORPHOLOGY OF GRAPHITE FLAKES IN GREY CAST IRON

137. DYNAMICS OF WATER COMPOSITION IN THE SOUTH-EASTERN (SOKOTO) SECTOR OF IULLEMMEDEN BASIN, NIGERIA, USING ISOTOPEAND HYDRO-CHEMICAL TECHNIQUES

138. DEVELOPMENT OF ENHANCED DIFFERENTIATED SERVICES MODEL OF CAMPUS INTERNET NETWORK: A CASE STUDY OF AHMADU BELLO UNIVERSITY, ZARIA

139. DEVELOPMENT OF A MODIFIED BACTERIAL FORAGING OPTIMIZATION ALGORITHM BASED BLACK HOLE ATTACK MITIGATION MODEL FOR WIRELESS SENSOR NETWORKS

140. DEVELOPMENT OF A DEEP CONVOLUTIONAL NEURAL NETWORK BASED SYSTEM FOR OBJECT RECOGNITION IN VISIBLE LIGHT AND INFRARED IMAGES

141. MICROWAVE PREPARATION AND APPLICATION OF ZnO-ZnFe2O4 COMPOSITE FOR PHOTOCATALYTIC DEGRADATION OF NAPHTHALENE IN OIL POLLUTION

142. MULTIVARIATE STATISTICAL ANALYSIS OF POLLUTION CHARACTERISTICS IN RIVERS OF THE MIDDLE GALMA BASIN, NIGERIA

143. DEVELOPMENT OF MEASUREMENT-BASED ADMISSION CONTROL ALGORITHM FOR EDGE CARRIER ETHERNET NETWORK TO REDUCE PACKET LOSS AND IMPROVE BANDWIDTH UTILIZATION

144. DEVELOPMENT OF AN IMPROVED SECURITY AIDED AND GROUP ENCOUNTER PROPHET ROUTING PROTOCOL OF AN OPPORTUNISTIC NETWORK

145. PERFORMANCE EVALUATION OF WUPA SEWAGE TREATMENT PLANT IN FCT; ABUJA

146. PRODUCTION OF HIGH GRADE SODIUM SILICATE AND SILICA SOL FROM KANKARA KAOLIN FOR ZSM-5 SYNTHESIS

147. MANAGEMENT STRATEGIES FOR GRAVITY SPRINKLE IRRIGATION SYSTEMS

148. ASSESSMENT OF GROUNDWATER POTENTIAL FOR RURAL WATER SUPPLY SCHEME USING GEOGRAPHIC INFORMATION SYSTEM (GIS) IN EDE NORTH LGA OF OSUN STATE NIGERIA

149. PERFORMANCE EVALUATION OF TREATED RICE HUSK ACTIVATED CARBON IN WATER TREATMENT AND REMOVAL OF PHENOL

150. MODELLING OF ENERGY REQUIREMENT DEMAND FOR TILLAGE OPERATIONS IN MAIZE PRODUCTION

151. MODELING AND PREDICTION OF RAIN INDUCED ATTENUATION ON GSM BSC RADIO LINK (A CASE STUDY OF AIRTEL NETWORK IN KADUNA)

152. DEVELOPMENT OF A DATA RATE-BASED SLEEP MODE ALGORITHM FOR ENERGY SAVINGS IN AN LTE HETEROGENEOUS NETWORK FOR A PICO eNodeB CELL

153. DEVELOPMENT OF A MODIFIED HANDOVER DECISION ALGORITHM FOR INTER-FEMTOCELL HANDOVER IN LONG TERM EVOLUTION NETWORK

154. DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE COMPARISON OF MIXED-MODE SOLAR CROP DRYERS WITH AND WITHOUT THERMAL STORAGE

155. DESIGN, SIMULATION ,CONSTRUCTION AND TESTING OF A THERMOSYPHON SOLAR WATER HEATER FOR A BLOCK IN POSTGRADUATE HOSTEL IN AHMADU BELLO UNIVERSITY, ZARIA

156. DEVELOPMENT OF A CULTURAL ALGORITHM BASED-ARTIFICIAL BEE COLONY FOR IMPROVED PROPORTIONAL-INTEGRAL-DERIVATIVE CONTROLLER PARAMETER TUNING

157. EVALUATION OF SOME PLANT EXTRACTS AS CORROSION IN HIBITORS FOR Al – 7.0 % Si – 0.35 % Mg ALLOY IN 3.5 % NaCl AQUEOUS SOLUTION

158. DEVELOPMENT OF AN IMPROVED ERGODIC CAPACITY OF UNDERLAY COGNITIVE RADIO WITH IMPERFECT CHANNEL STATE INFORMATION

159. DEVELOPMENT OF A POSITION AND TRAJECTORY TRACKING CONTROL OF BALL AND PLATE SYSTEM USING A DOUBLE FEEDBACK LOOP STRUCTURE

160. POTENTIAL-ENHANCEMENT OF DEGRADED ENGINE OIL FOR FRICTION REDUCTION IN COLD UPSET FORGING OF ALUMINIUM ALLOYS

161. DEVELOPMENT OF BAOBAB/SISAL REINFORCED LOW DENSITY POLYETHYLENE HYBRID COMPOSITE

162. ROUTE OPTIMIZATION OF MUNICIPAL SOLID WASTE MANAGEMENT (CASE STUDY OF MINNA METROPOLIS)

163. TIME-SERIES FORECAST OF NIGERIA’S ELECTRICITY STATISTICS FROM 1991-2028 USING AUTO-REGRESSIVE INTEGRATED MOVING AVERAGE (ARIMA) MODEL

164. PREPARATION AND APPLICATION OF α-FeOOH AND α-FeOOH-SiO2-Al2O3 CATALYSTS FOR TANNERY EFFLUENT TREATMENT USING FENTON OXIDATION PROCESS

165. EVALUATION OF SAW DUST ASH AS MINERAL FILLER IN ASPHALT MIXTURE

166. DESIGN AND FABRICATION OF A FLUID CATALYTIC CRACKING UNIT OF A MINI REFINERY

167. THE APPLICATION OF STATISTICAL QUALITY CONTROL TECHNIQUE IN FOOD AND BEVERAGE INDUSTRY A CASE STUDY OF HABILA FOOD AND BREVERAGES NIGERIA LTD- KANO

168. EFFECT OF FAULTY DESIGN AND CONSTRUCTION ON BUILDING MAINTENANCE (CASE STUDY OF AFDIN AND MOTHER CAT CONSTRUCTION COMPANIES IN KADUNA STATE)

169. DEVELOPMENT OF ZnO/SiO2 PHOTOCATALYSTS FOR ESTERIFICATION OF WASTE COOKING OIL

170. DEVELOPMENT AND SIMULATION OF A SINUSOIDAL PULSE WIDTH MODULATION-BASED CONTROL SCHEME FOR IMPROVED EFFICIENCY AND TORQUE PRODUCTION IN SINGLE PHASE INDUCTION MACHINES

171. OPTIMIZATION OF ACTIVATED CARBON PREPARATION FROM CORNCOB WASTEWATER TREATMENT

172. DEVELOPMENT OF A MODIFIED LINK BUDGET FORLOW EARTH ORBITING (LEO)-BASED LAND MOBILE SATELLITE COMMUNICATIONS SYSTEM

173. DEVELOPMENT AND PERFORMANCE EVALUATION OF AN AGITATED QUENCHING TANK/BATH

174. ADSORPTION AND PHOTOCATALYTIC DEGRADATION OF ACETAMINOPHEN USING ZnFe2O4-TiO2 COMPOSITE

175. EVALUATION OF RAIL TRANSPORTATION FOR PETROLEUM PRODUCTS DELIVERY IN NIGERIA

176. PREPARATION AND APPLICATION OF ZnO/MULLITE FOR THE INACTIVATION OF ESCHERICHIA COLI AND SALMONELLA ENTERICA IN WATER

177. THE EFFECT OF ELAPSED TIME AFTER MIXING ON BAGASSE ASH MODIFIED BLACK COTTON SOIL

178. AIR INJECTION STUDIES FOR ENHANCED OIL RECOVERY

179. PRODUCTION OF ANTIMICROBIAL SOAP USING A BLEND OF MORINGA OLEIFERA OIL AND RICINUS COMMUNIS (CASTOR OIL)

180. DESIGN AND DEVELOPMENT OF AN OPTIMIZED FLUXGATE MAGNETOMETER FOR IMPROVED EARTH’S MAGNETIC FIELD STUDIES

181. STUDIES OF REGENERATION OF CATALYTIC REFORMING CATALYST

182. Suitability Assessment of Kurumu, Garin-maiganga, Gindiakwati and Ogboyoba Coal Deposit Properties for Power Generation

183. USE OF COCONUT SHELL AS COARSE AGGREGATE IN LIGHTWEIGHT CONCRETE

184. EFFECT OF MIX RATIO AND CURING WATER ON THE COMPRESSIVE STRENGTH OF OIL PALM SHELL (OPS) AGGREGATE CONCRETE

185. EVALUATION OF MECHANICAL AND CORROSION PROPERTIES OF MILD STEEL IN SOME ENVIRONMENTS INHIBITED BY AFRICAN LOCUST BEANS TREE

186. THE SPATIO – TEMPORAL PATTERN OF URBAN SPRAWL IN ZARIA METROPOLIS, KADUNA STATE, NIGERIA

187. POTENTIALS OF EXTRACTS OF AFRICAN STAR APPLE AND COCK’S COMB LEAVES AS CORROSION INHIBITORS FORMEDIUM CARBON LOW ALLOY STEEL IN ACIDIC MEDIA

188. CHARACTERIZATION OF GUJENI IRON ORE DEPOSIT, KADUNA STATE, NIGERIA.

189. THE EFFECT OF ELAPSED TIME AFTER MIXING ON THE PROPERTIES OF MODIFIED LATERITE

190. ASSESSMENT OF DUMPSITE IMPACT ON SOIL AND GROUNDWATER QUALITY IN TUDUN WADA, KADUNA

191. DEVELOPMENT AND COMPARATIVE ANALYSIS OF QUOTIENTS REGRESSION BASED EMPIRICAL AND ARTIFICIAL NEURAL NETWORK BASED MODELS FOR PATH LOSS PREDICTION

192. EVALUATION OF LEVELISED COST OF ELECTRICITY GENERATED FROM HOT SPRING GEOTHERMAL RESOURCES IN NIGERIA: A CASE STUDY OF RAFIN REEWA HOT SPRING, LERE LOCAL GOVERNMENT OF KADUNA STATE

193. EFFECT OF STORAGE CONTAINER AND TIME ON POTABLE WATER QUALITY

194. DEVELOPMENT AND CHARACTERIZATION OF GLASS CERAMIC FROM COCA-COLA GLASS BOTTLE AND MAGNESITE

195. DEVELOPMENT OF AN IMPROVED IAR SORGHUM THRESHER

196. MODELLING OF ENERGY REQUIREMENT DEMAND FOR TILLAGE OPERATIONS IN MAIZE PRODUCTION

197. COST EVALUATION OF ROAD TRAFFIC ACCIDENT IN NIGERIA USING HUMAN CAPITAL APPROACH: ACASE STUDY OF ABUJA-LOKOJA ROAD

198. PVC STABILISERS BASED ON METAL CARBOXYLATES

199. ASSESSMENT OF OIL SPILLAGE AND ITS CONTROL IN THE OIL AND GAS INDUSTRY IN NIGERIA

200. ASSESSMENT OF OIL EXTRACTS FROM TIGER NUT(Cyperus esculentus), WATER MELON (Citrullus vulgaris) andNEEM SEEDS (Azadirachta indica) AS CUTTING FLUIDS IN DRILLING OPERATION OF MILD STEEL

201. PREDICTION OF LINK RELIABILITY IN A WIRELESS MOBILE AD HOC NETWORK (MANET) DUE TO PATH LOSS EFFECTS USING WEIBULL DISTRIBUTION

202. ENERGY DISSIPATION LOSSES IN DIFFERENT GEOMETRIES OF STEPPED SPILLWAY

203. DEVELOPMENT OF CANNY OPERATOR BASED GUI FOR THE MEASUREMENT OF OPTICAL RETURN LOSS

204. DEVELOPMENT OF AN IMPROVED SCHEDULING ALGORITHM FOR MULTICAST SERVICES OVER WiMAX NETWORKS USING PARTICLE SWARM OPTIMIZATION TECHNIQUES

205. CORROSION INHIBITION OF DOUBLE THERMALLY-AGED HIGH PRESSURE DIE CAST (SSM-HPDC) Al-Si-Mg ALLOY BY NEEM SEED AND GUAVA LEAF EXTRACTS

206. THE USE OF IRON ORE TAILING AS ADMIXTURE IN CEMENT MODIFICATION OF BLACK COTTON SOIL

207. STOCHASTIC ASSESSMENT OF NIGERIAN TIMBERS FOR BRIDGE DECKS IN ACCORDANCE TO AASHTO LFRD

208. PERFORMANCE OF TWO AGRO-HYDROLOGICAL MODELS IN SIMULATING SOIL WATER BALANCE OF A RAINFED MAIZE FIELD

209. RELIABILITY ANALYSIS OF REINFORCED CONCRETE BRIDGE DECKS SUBJECT TO FATIGUE

210. RELIABILITY ANALYSIS OF A PRESTRESSED CONCRETE BEAM

211. STRUCTURAL CHARACTERISATION OF CONCRETE AND SANDCRETE HOLLOW BLOCK PRODUCED FROM SELECTED CEMENT BRANDS IN NIGERIA

212. STUDIES OF INDUSTRIAL WASTEWATER EFFLUENT TREATMENT IN WASTE STABILIZATION POND

213. EVALUATION OF RHEOLOGY OF HIGH DENSITY POLYPROPYLENE ASPHALT

214. DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF AN AXIAL-FLOW MILLET THRESHER

215. PREPARATION AND APPLICATION OF ZnFe2O3/α-Al2O3 COMPOSITE PHOTOCATALYSTS FOR TEXTILE EFFLUENT TREATMENT

216. PERFORMANCE EVALUATION OF DOWNDRAFT GASIFIER FOR SYNGAS PRODUCTION USING RICE HUSK

217. MEASUREMENT AND EVALUATION OF THE PERFORMANCE PROPERTIES OF SELECTED LOCALLY PRODUCED LUBRICANTS (ENGINE OIL)

218. CHARACTERIZATION OF AZARA COPPER ORE DEPOSIT, NASARAWA STATE, NIGERIA

219. DEVELOPMENT OF METAL MATRIX/COCONUT SHELL ASH PARTICULATE COMPOSITES FOR AUTOMOTIVE APPLICATION

220. ENVIRONMENTAL IMPACT ASSESSMENT (EIA) OF THE PROPOSED KIRI HYDRO-ELECTRIC POWER PROJECT

221. EVALUATION OF THESTRUCTURAL PERFORMANCE OF ASPHALTIC CONCRETE HIGHWAY PAVEMENT

222. EFFECTS OF MIXING ON THE PRODUCT DISTRIBUTION OF PYROLYSED PLASTIC WASTES

223. IMPACT OF VEHICULAR TRAFFIC EMISSIONS ON AMBIENT AIR QUALITY IN KADUNA METROPOLIS

224. INVESTIGATION INTO YIELD REDUCTION OF SUGARCANE PLANTATION OF THE SAVANNAH SUGAR COMPANY, NUMAN NIGERIA

225. MODIFICATION AND PERFORMANCE EVALUATION OF IAR GROUNDNUT SHELLER FOR SOME SELECTED VARIETIES OF PULSES

226. OPTIMUM DESIGN OF REINFORCED CONCRETE RAFT FOUNDATIONS USING FINITE ELEMENT ANALYSIS

227. THE ROLE OF AGROFORESTRY PRACTICES IN SUSTAINABLE LAND MANAGEMENT IN RURAL AREAS OF KADUNA STATE, NIGERIA

228. VERIFICATION OF APPROPRIATE TEMPERATURE FOR ASPHALT PAVEMENT LAYING: A CASE STUDY OF KADUNA STATE

229. PREDICTION OF MOMENT CAPACITY OF CONCRETE SLABS SINGLY REINFORCED WITH CARBON FIBER REINFORCED PLASTICS (CFRP) USING SIMULATED ANNEALING

230. APPLICATION OF GLOBAL POSITIONING SYSTEM (GPS) AND GEOGRAPHIC INFORMATION SYSTEMS (GIS) IN MANAGEMENT OF TRAFFIC IN ABUJA CITY CENTRE, FCT, NIGERIA

231. RELIABILITY ANALYSIS OF OPTIMALLY DESIGNED REINFORCED CONCRETE FRAMES IN ACCORDANCE WITH EUROCODE 2 (2004)

232. APPLICATION OF GLOBAL POSITIONING SYSTEM (GPS) AND GEOGRAPHIC INFORMATION SYSTEMS (GIS) IN MANAGEMENT OF TRAFFIC IN ABUJA CITY CENTRE, FCT, NIGERIA

233. PREDICTION OF MOMENT CAPACITY OF CONCRETE SLABS SINGLY REINFORCED WITH CARBON FIBER REINFORCED PLASTICS (CFRP) USING SIMULATED ANNEALING

234. VERIFICATION OF APPROPRIATE TEMPERATURE FOR ASPHALT PAVEMENT LAYING: A CASE STUDY OF KADUNA STATE

235. THE ROLE OF AGROFORESTRY PRACTICES IN SUSTAINABLE LAND MANAGEMENT IN RURAL AREAS OF KADUNA STATE, NIGERIA

236. OPTIMUM DESIGN OF REINFORCED CONCRETE RAFT FOUNDATIONS USING FINITE ELEMENT ANALYSIS

237. MODIFICATION AND PERFORMANCE EVALUATION OF IAR GROUNDNUT SHELLER FOR SOME SELECTED VARIETIES OF PULSES

238. INVESTIGATION INTO YIELD REDUCTION OF SUGARCANE PLANTATION OF THE SAVANNAH SUGAR COMPANY, NUMAN NIGERIA

239. IMPACT OF VEHICULAR TRAFFIC EMISSIONS ON AMBIENT AIR QUALITY IN KADUNA METROPOLIS

240. EFFECTS OF MIXING ON THE PRODUCT DISTRIBUTION OF PYROLYSED PLASTIC WASTES

241. EVALUATION OF THESTRUCTURAL PERFORMANCE OF ASPHALTIC CONCRETE HIGHWAY PAVEMENT

242. ENVIRONMENTAL IMPACT ASSESSMENT (EIA) OF THE PROPOSED KIRI HYDRO-ELECTRIC POWER PROJECT

243. DEVELOPMENT OF METAL MATRIX/COCONUT SHELL ASH PARTICULATE COMPOSITES FOR AUTOMOTIVE APPLICATION

244. CHARACTERIZATION OF AZARA COPPER ORE DEPOSIT, NASARAWA STATE, NIGERIA

245. MEASUREMENT AND EVALUATION OF THE PERFORMANCE PROPERTIES OF SELECTED LOCALLY PRODUCED LUBRICANTS (ENGINE OIL)

246. PERFORMANCE EVALUATION OF DOWNDRAFT GASIFIER FOR SYNGAS PRODUCTION USING RICE HUSK

247. PREPARATION AND APPLICATION OF ZnFe2O3/α-Al2O3 COMPOSITE PHOTOCATALYSTS FOR TEXTILE EFFLUENT TREATMENT

248. DESIGN, CONSTRUCTION AND PERFORMANCE EVALUATION OF AN AXIAL-FLOW MILLET THRESHER

249. EVALUATION OF RHEOLOGY OF HIGH DENSITY POLYPROPYLENE ASPHALT

250. STUDIES OF INDUSTRIAL WASTEWATER EFFLUENT TREATMENT IN WASTE STABILIZATION POND

251. STRUCTURAL CHARACTERISATION OF CONCRETE AND SANDCRETE HOLLOW BLOCK PRODUCED FROM SELECTED CEMENT BRANDS IN NIGERIA

252. RELIABILITY ANALYSIS OF A PRESTRESSED CONCRETE BEAM

253. RELIABILITY ANALYSIS OF REINFORCED CONCRETE BRIDGE DECKS SUBJECT TO FATIGUE

254. PERFORMANCE OF TWO AGRO-HYDROLOGICAL MODELS IN SIMULATING SOIL WATER BALANCE OF A RAINFED MAIZE FIELD

255. STOCHASTIC ASSESSMENT OF NIGERIAN TIMBERS FOR BRIDGE DECKS IN ACCORDANCE TO AASHTO LFRD

256. THE USE OF IRON ORE TAILING AS ADMIXTURE IN CEMENT MODIFICATION OF BLACK COTTON SOIL

257. CORROSION INHIBITION OF DOUBLE THERMALLY-AGED HIGH PRESSURE DIE CAST (SSM-HPDC) Al-Si-Mg ALLOY BY NEEM SEED AND GUAVA LEAF EXTRACTS

258. DEVELOPMENT OF AN IMPROVED SCHEDULING ALGORITHM FOR MULTICAST SERVICES OVER WiMAX NETWORKS USING PARTICLE SWARM OPTIMIZATION TECHNIQUES

259. DEVELOPMENT OF CHITOSAN-RICE HUSK ASH COMPOSITE ADSORBENT FOR REMOVAL OF CRUDE OIL FROM CONTAMINATED WATER

260. ISO-SAFETY DESIGN OF FLAT SLABS IN ACCORDANCE WITH EUROCODE 2

261. INCORPORATION OF RELIABILITY INTO NIGERIAN EMPIRICAL MECHANISTIC PAVEMENT ANALYSIS AND DESIGN SYSTEM (NEMPADS)

262. MANUFACTURING SYSTEM OPTIMIZATION: A STUDY OF UNITY AND EFFICIENCY IN PRODUCTION (UEP) IN PEUGEOT AUTOMOBILE NIGERIA (PAN)

263. RAINFALL DATA GENERATION FOR SAMARU, ZARIA USING STATISTICAL PARAMETERS

264. DEVELOPMENT OF A FIREFLY ALGORITHM BASED ANALYTICAL METHOD FOR OPTIMAL LOCATION AND SIZING OF DISTRIBUTED GENERATION IN RADIAL DISTRIBUTION NETWORKS

265. DEVELOPMENT OF AN IMPROVED DYNAMIC ALGORITHM TOENHANCE ENERGY SAVING IN LONG TERM EVOLUTION MOBILE ACCESS NETWORKS.

266. DEVELOPMENT AND CHARACTERIZATION OF RECYCLED HIGH DENSITY POLYETHYLENE (RHDPE)/NATURAL FIBRE COMPOSITES

267. PRODUCTION AND CHARACTERIZATION OF RECYCLED LDPE/ PERIWINKLE (TURRITELA COMMUNIS) SHELL PARTICULATE COMPOSITE

268. EVALUATION OF HOT- GAS AND HEATED TOOL WELDMENTS OF POLYPROPYLENE/BONE PARTICULATE COMPOSITES

269. INVESTIGATION OF CORROSION INHIBITION OFGUAVA, BANANA AND ALMOND PLANT EXTRACT IN 0.5M OF HCl AND H2SO4 SOLUTION ON LOW CARBON STEEL

270. LABORATORY INVESTIGATION OF FLOW CHARACTERISTICS OF A SUTRO WEIR

271. DEVELOPMENT AND CHARACTERIZATION OF Al-3.7%Cu-1.4%Mg ALLOY/PERIWINKLE ASH (Turritella communis) PARTICULATE COMPOSITES

272. FINITE ELEMENT MODEL FOR PREDICTING RESIDUAL STRESSES IN SHIELDED METAL ARC WELDING OF MILD STEEL PLATES

273. BIOCLIMATIC RESPONSE IN DESIGN OF FACULTY OF ENVIRONMENTAL SCIENCES IN THE HOT DRY CLIMATE OF YOBE STATE UNIVERSITY (YSU), DAMATURU

274. A FRAMEWORK FOR RURAL ROADS ACCESSIBILITY PLANNING

275. AN ASSESSMENT OF THE PERFORMANCE AND MAINTENANCE CULTURE OF THE AHMADU BELLO UNIVERSITY, SAMARU, ZARIA WATER TREATMENT PLANT

276. KINETIC STUDIES OF MIDDLE DISTILLATE FORMATION DURING CATALYTIC CRACKING OF HEAVY GAS OIL USING ZEOLITE-Y PREPARED FROMKANKARA-KAOLIN

277. ESTIMATION OF DETECTION THRESHOLD FOR SPECTRUM SENSING IN COGNITIVE RADIO USING ADAPTIVE NEUROFUZZY INFERENCE SYSTEM AND MONTE CARLO TECHNIQUES

278. PROCESS INTENSIFICATION ON BIODIESELPRODUCTION FROM JATROPHACURCAS SEED OIL

279. STOCHASTIC SECTION MODULUS REQUIREMENT FOR CARBON FIBRE REINFORCED PLASTIC PULTRUDED BEAMS

280. STABILIZATION OF BLACK COTTON SOIL WITH LIME- IRON ORE TAILING BLEND

281. STABILIZATION OF BLACK COTTON SOIL WITH IRON ORE TAILING

282. RADIAL DISTRIBUTION NETWORK MODELING AND ANALYSIS CONSIDERING POWER FLOW AND RECONFIGURATION (A CASE STUDY OF AZARE DISTRIBUTION NETWORK)

283. DEVELOPMENT OF ENVIRONMENTALLY FRIENDLY BIODEGRADABLE CUTTING FLUID FROM SOYA BEANS (GLYCINE MAX)

284. ESTIMATION OF DETECTION THRESHOLD FOR SPECTRUM SENSING IN COGNITIVE RADIO USING ADAPTIVE NEUROFUZZY INFERENCE SYSTEM AND MONTE CARLO TECHNIQUES

285. DEVELOPMENT OF AN IMPROVED CULTURAL ARTIFICIAL FISH SWARM ALGORITHM WITH CROSSOVER

286. PROBABILISTIC EVALUATION OF HORIZONTALLY CURVED ALUMINIUM ALLOY BRIDGE DECKS ON STEEL GIRDERS

287. DEVELOPMENT OF AN IMPROVED APPROACH TO BIOMETRIC FINGERPRINT IMAGE COMPRESSION USING COIFLET SIGNAL TRANSFORMATION ALGORITHM

288. DESIGN, DEVELOPMENT AND PERFORMANCE EVALUATION OF A FRUIT JUICE EXTRACTION MACHINE

289. ASSESSMENT OF THE IMPACT IMPACT OF CLIMATE CHANGE ON WATER RESOURCES AVAILABILITY IN THE SOKOTO-RIMA RIVER BASIN

290. DESIGN, CONSTRUCTION AND SIMULATION OF MAIZE COBS FLUIDIZED BED COMBUSTOR

291. EFFECTS OF GAS METAL ARC WELDING PARAMETERS ON THE MECHANICAL AND CORROSION BEHAVIOUR OF AUSTENITIC STAINLESS STEEL IN SOME ENVIRONMENTS

292. EFFECT OF EGGSHELL AS A FILLER ON THE MECHANICAL PROPERTIES OF FLEXIBLE POLYURETHANE FOAM

293. CHARACTERIZATION AND BENEFICIATION OF ZURAK LEAD-ZINC ORE DEPOSIT, PLATEAU STATE

294. POTENTIAL OF CANE MOLASSES AS QUENCHING MEDIUM FOR (0.61%C) HIGH CARBON STEEL

295. PERFORMANCE IMPROVEMENT OF Ti-6Al-4V DENTAL BIOMATERIAL USING ISOTHERMAL HEAT TREATMENT AND BITTER LEAF EXTRACT AS INHIBITOR

296. DEVELOPMENT AND CHARACTERIZATION OF POLY(LACTIC ACID)(PLA)/ GUINEACORN (SORGHUM BICOLOR) HUSKS PARTICULATE (GHP) COMPOSITES.

297. EFFECTS OF AFRICAN BASIL(Ocimumgratissimum) AND BUSH MINT(Hyptissuaveolens) LEAVES EXTRACTS IN INHIBITING CORROSION OF MEDIUM CARBON STEEL IN 0.5M OF HCl, H2SO4 AND NaCl MEDIA

298. DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR OVEN

299. DEVELOPMENT OF A FUZZIFIED-TREND MAPPING AND IDENTIFICATION (FTMI) MODEL FOR FUZZY TIME SERIES FORECASTING

300. THE ATTITUDE OF STUDENTS TOWARDS THE TEACHING AND LEARNING OF GEOGRAPHY

301. CHARACTERIZATION AND BENEFICIATION OF ZURAK LEAD-ZINC ORE DEPOSIT, PLATEAU STATE

302. POTENTIAL OF CANE MOLASSES AS QUENCHING MEDIUM FOR (0.61%C) HIGH CARBON STEEL

303. PERFORMANCE IMPROVEMENT OF Ti-6Al-4V DENTAL BIOMATERIAL USING ISOTHERMAL HEAT TREATMENT AND BITTER LEAF EXTRACT AS INHIBITOR

304. DEVELOPMENT AND CHARACTERIZATION OF POLY(LACTIC ACID)(PLA)/ GUINEACORN (SORGHUM BICOLOR) HUSKS PARTICULATE (GHP) COMPOSITES.

305. EFFECTS OF AFRICAN BASIL(Ocimumgratissimum) AND BUSH MINT(Hyptissuaveolens) LEAVES EXTRACTS IN INHIBITING CORROSION OF MEDIUM CARBON STEEL IN 0.5M OF HCl, H2SO4 AND NaCl MEDIA

306. DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A SOLAR OVEN

307. DEVELOPMENT OF A FUZZIFIED-TREND MAPPING AND IDENTIFICATION (FTMI) MODEL FOR FUZZY TIME SERIES FORECASTING

308. IMPROVED DESIGN AND PERFORMANCE ANALYSIS OF SIMILAR POLE RATIO DUAL STATOR WINDINGS FOR SIX PHASE INDUCTION MACHINES,

309. STOCHASTIC EVALUATION OF OFFSHORE CARBON FIBRE REINFORCED CONCRETE PLATFORMS ON ALUMINUM GIRDERS

310. FAILURE ANALYSIS AND DEVELOPMENT OF HIGH WEAR RESISTANT LOCALLY- MANUFACTURED GOLD – MILL GRINDING PLATES.

311. DESIGN, SIMULATION, CONSTRUCTION AND PERFORMANCE EVALUATION OF A THERMOSYPHON SOLAR WATER HEATER

312. PRODUCTION OF BIOGAS FROM THE ANAEROBIC CO-DIGESTION OF TANNERY FLESHING AND COW-DUNG ENHANCED BY SODIUM AND CALCIUM ALGINATES.

313. SUITABILITY OF SOME COMMON NIGERIAN TIMBER SPECIES FOR USE AS SIMPLY SUPPORTED BRIDGE BEAMS USING EUROCODES

314. SUITABILITY OF ORANGE PEELS, BANANA PEELS AND RECYCLED LOW DENSITY POLYETHYLENE (RLDPE) COMPOSITES FOR PARTICLEBOARD MANUFACTURING

315. SYNCHRONOUS MACHINE PARAMETER EXTRACTION FROM REAL TIME OPERATING DATA

316. OPTIMUM IRRIGATION SCHEDULES FOR TOMATO PRODUCTION UNDER FADAMA CONDITIONS IN THE GUINEA SAVANNAH REGION OF NIGERIA

317. CHARACTERISATION OF SOME NIGERIAN COALS FOR POWER GENERATION

318. APPLICATION OF FUZZY C-MEANS CLUSTERING AND PARTICLE SWARM OPTIMIZATION TO IMPROVE VOICE TRAFFIC FORECASTING IN FUZZY TIME SERIES

319. TECHNO-ECONOMIC EVALUATION OF SELEXOL-BASED CO2 CAPTURE PROCESS FOR ASHAKA CEMENT PLANT

320. MODIFICATION OF GUM ARABIC

321. DESIGN AND FABRICATION OF CRUDE DISTILLATION UNIT COMPONENTS FOR A MINI PETROLEUM REFINERY

322. PROSPECTS OF SOLAR ICE MAKING

323. THE EFFECT OF PUNCH PROFILE RADIUS ON PUNCH LOAD, EDG PULL-IN AND THICKNESS STRAINS IN DEEP DRAWING

324. DEVELOPMENT OF ZEOLITE Y AND ZSM5 COMPOSITE CATALYST FROM KANKARA KAOLIN

325. BEAUTY AND FASHION CENTRE ABUJA: EXPLORING THE USE OF DAYLIGHT TO ENHANCE VISUAL COMFORT

326. 2-WAY DOUBLE LAYER SPACE GRID AS ROOF STRUCTURES

327. A STOCHASTIC LINEAR PROGRAMMING APPROACH FOR THE PRODUCTION, DISTRIBUTION AND INVENTORY SYSTEMS OF THE NIGERIAN BOTTLING COMPANY (NBC) : A CASE STUDY OF THE NORTH-WESTERN ZONE OF NIGERIA

328. “EFFECTIVENESS OF OVERLAPPING HOOPS AS DUCTILITY REINFORCEMENT IN SHORT REINFORCED CONCRETE COLUMNS”

329. BEHAVIOUR OF SOILCRETE UNDER SHORT AND LONG TIME LOADINGS

330. Computer Simulation of the Telephone System in the Northern States of Nigeria

331. NON-CIRCULAR BORING ON THE LATHE USING CHAIN DRIVE FOR POWER TRANSMISSION

332. THE SUITABILITY OF COTTON STALKS FOR THE PRODUCTION OF MEDIUM DENSITY FIBREBOARD

333. EFFECTS OF SOME BITUMEN COATING TREATMENTS ON THE CORROSION AND MECHANICAL BEHAVIOUR OF LOW CARBON STEEL

334. A SUBSIDENCE MONITORING PROGRAM FOR AHMADU BELLO UNIVERSITY DAM, ZARIA.

335. INVESTIGATION OF THE STRENGTH CHARACTERISTICS OF LATECRETE MATERIALS

336. EXPERIMENTAL INVESTIGATION OF FLOW CHARACTERISTICS OVER SEMI-CIRCULAR BROAD CRESTED WEIR MODELS

337. PROPERTIES OF CORN COB ASH CONCRETE.

338. CORROSION AND FATIGUE BEHAVIOUR OF WELDED AUSTENITIC STAINLESS STEEL IN DIFFERENT ENVIRONMENTS.

339. PERFORMANCE ENHANCEMENT OF WATER SUPPLYDISTRIBUTION IN MINNA METROPOLIS.

340. ANALYSIS AND OPTIMISATION OF INTER CELL HANDOVER DYNAMICS IN A GSM NETWORK

341. EXERGY AND ECONOMIC ANALYSES OF POLYMER ELECTROLYTE MEMBRANE (PEM) FUEL CELL SYSTEM CONFIGURATIONS.

342. DEVELOPMENT OF AN IMPROVED INTEGRATED ROUTING PROTOCOL FOR OPPORTUNISTIC NETWORK WITH CONGESTION CONTROL USING PRE-EMPTIVE DATA EVICTION

343. DEVELOPMENT OF AN IMPROVED INTEGRATED ROUTING PROTOCOL FOR OPPORTUNISTIC NETWORK WITH CONGESTION CONTROL USING PRE-EMPTIVE DATA EVICTION

344. DEVELOPMENT OF PILOT-SCALE REACTOR FOR THE PRODUCTION OF ALUMINIUM HYDROXIDE FROM ALUM DERIVED FROM KANKARA KAOLIN FOR ZEOLITE Y SYNTHESIS

345. DESIGN AND DEVELOPMENT OF A CARBONATOR FOR CARBON DIOXIDE CAPTURE USING LOCALLY PRODUCED LIME

346. DESIGN, CONSTRUCTION AND TESTING OF A CHARCOAL FIRED CRUCIBLE FURNACE FOR MELTING OF 10KG OF ALUMINIUM

347. DEVELOPMENT AND CHARACTERIZATION OF SELF-HEALING CAR PAINT USING CHITOSAN

348. TECHNO-ECONOMIC EVALUATION OF SELEXOL-BASED CO2 CAPTURE PROCESS FOR ASHAKA CEMENT PLANT

349. PRODUCTION OF BIOETHANOL FROM ELEPHANT GRASS (Pennisetum purpureum) STEM

350. CARRIER PROPAGATION ON THE SHIRORO COMPLEX 132kV TRANSMISSION LINES

351. THE FUNCTIONAL FORM AND ENERGY STABILITY OF TRAVEL EXPENDITURES IN NIGERIA

352. SYNTHESIS OF BIOLUBRICANT FROM VEGETABLE OILS

353. THE STRUCTURE, PETROLOGY AND GEOCHEMISTRY OF THE TIBCHI YOUNGER GRANITE RING-COMPLEX, NIGERIA

354. POTENTIAL-ENHANCEMENT OF DEGRADED ENGINE OIL FOR FRICTION REDUCTION IN COLD UPSET FORGING OF ALUMINIUM ALLOYS

355. ANALYSIS OF FOUR-BAR MECHANISMS

356. GASIFICATION OF LIQUID FUELS

357. EFFECT OF SOME VEGETABLE BASED OIL AS LUBRICANTS ON THE EXTRUSION OF ALUMINIUM

358. APPLICATION OF FIBRE REINFORCED CONCRETE IN THE DESIGN AND CONSTRUCTION OF TENSION CONTROLLED STRUCTURES

359. A STUDY OF THE INFLUENCE OF STOPPED DELAY ON DRIVER GAP ACCEPTANCE BEHAVIOUR

360. THE DESIGN OF A RATE-GYRO FOR USE ON LAND VEHICLES

361. STUDIES ON THE PROPERTIES OF SHORT OKRA-GLASS FIBERS REINFORCED EPOXY HYBRID COMPOSITES

362. QUALITY ASSESSMENT OF HADASSA STEEL

363. SUITABILITY OF LOCAL VEGETABLE OILS FOR COLD EXTRUSION OF ALADJA ST60-2 STRUCTURAL STBEL.

364. FILTER MEDIA

365. DESIGN AND PRODUCTION OF MULTI-SPINDLE ATTACHMENT TO THE UNIVERSAL LATHE

366. BUILDING RESPONSE TO DYNAMIC LOADS DUE TO QUARRY BLASTING.

367. EXPERIMENTAL PERFORMANCE EVALUATION OF LABORATORY AND FIELD SOLAR AND HYBRIDS CROP DRYERS

368. ASSESSMENT OF TRANSIENT STABILITY ENHANCEMENT CAPABILITY OF UNIFIED POWER FLOW CONTROLLER IN A MULTI-MACHINE POWER SYSTEM

369. STUDY OF NTV – JOS SIGNAL RECEPTION IN ZARIA

370. THE EFFECTS OF STABILIZATION ON BLACK COTTON SOIL

371. DETERMINATION OF THE AMOUNT OF DYE EXTRACTED FROM PLANTS AND EXAMINATION OF THEIR FASTNESS PROPERTIES TO COTTON FABRICS

372. A SYSTEM FOR RURAL STORAGE OF FRESH TOMATO

373. THE STUDY OF THE REFRACTORY PROPERTIES OF SOME NIGERIAN CLAYS

374. PERFORMANCE EVALUATION OF NEAZDP ANIMAL TRACTION PROGRAMME

375. PAVEMENT FAILURE INVESTIGATION ALONG ZARIA – FUNTUA ROAD

376. DESIGN & CONSTRUCTION OF A REVERBERATION METTER FOR THE MEASUREMENT OF REVERBERATION TIME BY DIGITAL METHOD

377. A CROSS-COMPILER FOR THE CYBER 72/M6800 SYSTEM

378. DEVELOPMENT OF MAINTENANCE SCHEDULES FOR NATIONAL ELECTRIC POWER AUTHORITY GENERATING FACILITIES”

379. PARKING CHARACTERISTICS OF HOTELS IN KANO METROPOLIS

380. WASTE PAPER RECYCLING AND ITS FEASIBILITY IN KANO

381. FOURIER ANALYSIS OF CONDUCTION ELECTRON VELOCITIES BY ULTRASONIC WAVES IN THE NOBLE METALS

382. REVIEW OF PAST ROAD DEVELOPMENT PLANS FOR BORNO AND YOBE STATES OF NIGERIA

383. INVESTIGATION OF MECHANICAL PROPERTIES OF ZEOLITE-Y AND ZSM-5 CATALYSTS SYNTHESIZED FROM LOCALLY AVAILABLE CLAYS

384. TIME AND COST PERFORMANCE LIABILITY ALLOCATION IN THE BUILDING PROCESS

385. THE QUALITY OF SANDCRETE HOLLOW BLOCKS MANUFACTURED IN ILORIN AND ITS ENVIRONS

386. RELIABILITY-BASED RATING OF THE BS 8110 DESIGN CRITERIA FOR REINFORCED CONCRETE COLUMNS

387. MONTE CARLO STUDY OF VARIABILITY IN STRENGTH OF REINFORCED CONCRETE BEAMS AND COLUMNS

388. Bituminous Emulion: Preparation of Its Anionic Type Using Ash-lye

389. THE STUDY OF THE REFRACTORY PROPERTIES OF SOME NIGERIAN CLAYS

390. THE USE OF GRADED LOCAL SAND IN SLOW SAND FILTRATION

391. MODELLING AND STUDY OF EXCITATION PHENOMENA IN INDUCTION GENERATORS

392. THE RELATIVE EFFECTIVENESS OF COMMON STABILIZING AGENTS ON SHIKA LATERITIC SOIL.

393. PROGRAM FOR ONE-WAY REINFORCED CONCRETE SLABS TO BS8110 (1985)

394. STRUCTURE AND ELECTRICAL PROPERTIES OF ELECTRON-BEAM EVAPORATED ZIRCONIA THIN FILMS

395. SOME HEAVY METALS IN PLANTS IRRIGATED WITH SEWAGE EFFLUENTS

396. STUDIES ON HIGH TEMPERATURE HEAT PUMP SYSTEMS.

397. DESIGN OF AN AIR-CONDITIONING SYSTEM FOR SECOND AND THIRD FLOORS OF MECHANICAL ENGINEERING DEPARTMENT BUILDING A.B.U.

398. COMPUTER-AIDED DESIGN (CAD)/ COMPUTER-AIDED MANUFACTURING (CAM) AND THEIR APPLICATIONS IN NIGERIA

399. CHARACTERIZATION OF SOKOTO PHOSPHATE ROCK AND DESIGN OF PROCESS FLOWSHEET FOR ITS BENEFICIATION

400. DRAINAGE IMPROVEMENT DESIGN FOR RIVER GINZO CHANNEL, KATSINA TOWN, NIGERIA

401. DEVELOPMENT AND APPLICATION OF DROUGHT FORECASTING MODELS FOR NIGERIA SUDANO SAHELIAN REGION

402. DESIGN AND CONSTRUCTION OF ELECTRONICS SECURITY ASSISTANT

403. DEVELOPMENT OF A PROCESS ROUTE FOR THE BENEFICIATION OF MALLAM AYUBA MANGANESE DEPOSIT TO FERROMANGANESE FEED GRADE

404. The Effect of Disc Deterioration on the Performance of Ultra Low Volume Sprayer

405. DETERMINATION OF STRESSES IN A SPUR GEAR BY PHOTOELASTIC AND NUMERICAL METHODS

406. UTILIZATION OF AQUEOUS TWO PHASE SYSTEM FOR THE REMOVAL OF COLOUR FROM TEXTILE WASTEWATER

407. YIELD AND WATER USE RESPONSE OF WATERMELON UNDER DEFICIT IRRIGATION AND MULCH

408. Investigation on inertia propulsion concept

409. SOCIO-ECONOMIC BENEFITS OF IRRIGATION USING BORROW PIT WATER

410. DESIGN OF FERTILIZER APPLICATOR FOR SMALL SCALE FARMING UNDER NIGERIAN CONDITIONS

411. MODELING, SIMULATION AND STABILIZATION OF A DOUBLE QUAD INVERTED PENDULUM SYSTEM (DQIP) USING A LINEAR QUADRATIC REGULATOR (LQR) CONTROLLER

412. EXTRACTION AND CHARACTERISATION OF CHITIN AND CHITOSAN FOR CHROMIUM (VI) ION REMOVAL FROM WASTEWATER

413. GROUND-WAVE RECEPTION AND GROUND CONDUCTIVITY

414. THE DESIGN OF A TRAFFIC DETECTOR USING THE PHASE-LOCK-LOOP CONCET

415. ERGONOMIC STUDIES AND IMPROVEMENT ON TRADITIONAL OIL EXTRACTION OPERATIONS

416. STRENGTH AND DURABILITY CHARACTERISTICS OF EARTHCRETE BLOCKS

417. STRUCTURAL GRADE PROPERTIES OF SOME’ SELECTED NIGERIAN TIMBER SPECIES: Chlorophoral excelsa (Iroko); Khaya senegalensis (Mahogany); Ceiba pentandra (Araba); and Daniellia oliveri (Maje).

418. Development of an Optimal Reconfiguration Algorithm for Radial Distribution Electrical Power Networks (A Case Study of Zaria Distribution Network)

419. EFFECT OF CALCINATION TEMPERATURE ON THE COMPOSITION AND PHOTOCATALYTIC ACTIVITY OF NIGERIAN NATURAL ILMENITE, SPHALERITE AND WOLFRAMITE

420. DEVELOPMENT OF ADSORBENTS AND PHOTOCATALYSTS USING NIGERIAN PINDIGA BENTONITIC CLAY

421. DESIGN AND ENVIRONMENTAL – BEHAVIOUR MODELLING OF A BLUETOOTH CONTROLLED PLANTER ROBOT

422. ASSESSMENT OF THE IMPACT OF POWER OUTAGES ON COMMERCIAL CONSUMERS (A CASE STUDY OF COLDROOMS CONSUMERS AT TRANS-AMADI AREA, PORT- HARCORT)

423. EFFECT OF TEMPERING TIME, SODIUM CARBONATE ADDITION AND METHOD OF PREPARATION ON THE PROPERTIES OF FOUNDRY MOULDING SANDS

424. MODELING, ANALYSIS AND SIMULATION OF A DC GRID SINGLE ENDED PRIMARY INDUCTANCE CONVERTER FOR DC LOAD

425. DESIGN AND CONSTRUCTION OF A STARTER MECHANISE FOR APPLICATION IN A TWO-STROKE ENGINE

426. ECONOMIC VIABILITY OF A SMALL HYDROPOWER PLANT AT ONUAKU RIVER, ABIA STATE NIGERIA

427. “THE STUDY OF HARDENING CHARACTERISTICS OF HIGH CARBON STEELS AND DUCTILE CAST IRON

428. MODELING AND STABILIZATION ANALYSES OF A MICRO UNMANNED AERIAL VEHICLE SYSTEM USING A MODIFIED RADIO CONTROLLED-BASED HELICOPTER

429. TOWARDS SIMPLIFIED COMPUTER-BASED ANALYSIS OF SKEWED-BRIDGES

430. RELIABILITY-BASED ANALYSIS AND CALIBRATION OF EUROCODE 5 DESIGN CRITERIA FOR A SOLID TIMBER PORTAL FRAME

431. ECONOMIC EVALUATION OF PAVEMENT OVERLAY DESIGN STRATEGIES (KADUNA-ABUJA ROAD AS A CASE STUDY)

432. MODELLING AND SIMULATION OF AMMONIA-WATER SEPARATION FOR APPLICATION IN ABSORPTION HEAT PUMP

433. PROCESS DEVELOPMENT AND EQUIPMENT DESIGN FOR DEXTRIN MANUFACTURE FROM STARCH

434. A STUDY OF ROUNDABOUT – MODE OF OPERATION AND PERFORMANCE

435. Development and Evaluation of a Single-Pass Vegetable {PRIVATE } Mill

436. SORPTION OF METAL IONS FROM AQUEOUS SOLUTION BY POLYMER RESINS:DEVELOPMENT OF A GENERALIZED KINETIC MODEL

437. A FUNCTIONAL TRANSPORTATION PLAN FOR EFFECTIVE WORKTRIP IN KADUNA METROPOLIS

438. STUDIES ON TECHNOLOGICAL INTERVENTIONS TO UPGRADE SELECTED INDIGENEOUS FOOD PROCESSES

439. DRAIN ENVELOPE THICKNESS AND PERMEABILITY EFFECTS ON PRESSURE HEAD LOSS ACROSS THE ENVELOPE

440. QUALITY OF SANDCRETE HOLLOW BLOCKS PRODUCED IN KOGI STATE

441. ON LINEAR ELASTIC STRAIN ENERGY-RELEASE RATE AND THE J-INTEGRAL

442. BEHAVIOUR OF CONCRETE SUBJECTED TO VARIOUS ELEVATED TEMPERATURES

443. THE HYDROLOGY OF SAMARU DAM CATCHMENT BASIN

444. COMPARATIVE ANALYSIS OF THE AMINOLYSIS OF POLYETHYLENE TEREPHTHALATE WASTE AND SODIUM DICHROMATE AS CORROSION INHIBITORS FOR MILD STEEL IN 0.5M HCL AND 0.5M H2SO4

445. BRONZE IMMERSION PLATING ON MILD STEEL IN CYANTDE-FREE SOLUTIONS

446. Design Construction, Simulation and Testing of a 300W Wind Powered Battery Charger

447. COMPRESSIVE STRENGTH OF CONCRETE AND MORTAR CONTAINING ASHES AS PARTIAL REPLACEMENT FOR CEMENT

448. COMPARATIVE STUDY OF THE PERFORMANCE OF MIMO EQUALIZERS FOR WIRELESS COMMUNICATION RECEIVERS

449. DIURNAL AND SEASONAL VARIATIONS OF MEDIUM WAVE RADIO SIGNAL AT ZARIA

450. HARDENABILITY RESPONSE OF ALADJA ST 60-2 STRUCTURAL STEEL QUENCHED IN FATTY BASE LOCAL OILS

451. MATHEMATICAL MODELLING FOR EVALUATING ROAD MAINTENANCE NEEDS AND INTERVENTIONS”

452. LIGHTLY LOADED FOUNDATION FAILURES AT SOKOTO – INVESTIGATIONS AND SOLUTIONS

453. VERTICAL STRESS DISTRIBUTION IN BALLAST AND SUBGRADE UNDER STATICALLY LOADED WOODEN TIES

454. CEMENT STABILIZATION USING HYDRATED LIME AS ADMIXTUBE

455. ESTIMATION OF THE EFFECT OF IRRIGATION ON ANNUAL RECHARGE AT THE KANO PROJECT AREA OF KANO RIVER BASIN

456. REGIONAL FLOOD-FREQUENCY ANALYSIS OF OGUN-OSHUN RIVER BASINS

457. A METHOD OF INFILTRATION MEASUREMENT IN THE SOIL”

458. NON-LINEAR ANALYSIS OF SEEPAGE INTO DRAINS

459. MIXING CHARACTERISTICS AND PERFORMANCE OF STABILIZATION PONDS

460. EVALUATION OF LABOUR-BASED TECHNIQUE FOR CONSTRUCTION OF SMALL EARTH DAMS IN NIGERIA

461. STRESS DISTRIBUTION OF SHORT REINFORCED CONCRETE COLUMNS LOADED UNDER SMALL ECCENTRICITIES

462. DEMARCATION AND LAND TENURE SURVEY OF A DAM RESERVOIR FOR COMPULSORY ACQUISITION A Case Study of Gada Benye Irrigation-Cum-Water Supply Project at Benye Undertaken by Kaduna- Karaduwa River Basin and Rural Development Authority, Dutsin-Ma.

463. PRODUCTION AND WELD JOINT PERFORMANCE EVALUATION OF ARC WELDING ELECTRODES FROM DANA ROLLING MILL SCALES

464. THE ROLE OF DRY CONSTRUCTION IN ENSURING AFFORADABLE HOUSES IN NIGERIA

465. THE USE OF OIL PALM FIBER AS AN ADDITIVE IN CONCRETE

466. COMPARATIVE ANALYSIS OF PORTLAND CEMENT IN SOUTHWESTERN NIGERIAN

467. GEOTECHNICAL PROPERTIES OF SOME LATERITIC SOILS IN OSUN STATE

468. LAND USE APPRAISALIN OSUN STATE

469. EFFECTS OF SOLID WASTESON THE QUALITY OF UNDERGROUND WATER

470. EFFECT AND IMPLICATION OF FLUORIDE ON DRINKING WELL WATER

471. IMPROVEMENT OF BEARING CAPACITY OF SANDY SOIL BY GROUTING

472. EVALUATION OF THE EFFECTS OF SOLID WASTE (REFUSE DUMP) ON SURFACE AND UNDERGROUND WATER IN MOSADOLUWA COMMUNITY IN OSOGBO LOCAL GOVERNMENT, civil engineering project topics

473. GEOTECHNICAL PROPERTIES OF SOME LATERITIC SOILS IN OSUN STATE

474. BIOLGICAL WASTE WATER TREATEMENTIN NIGERIA

475. DOMESTIC WASTE WATER TREATMENT IN NIGERIA

476. PRIMARY CAUSES OF ROAD PAVEMENT FAILURE AND POSSIBLE SOLUTION

477. COMPARATIVE STUDY OF STRENGTH OF BAMBOO CANE FIBRE CONCRETE BEAM AND REINFORCED CONCRETE BEAM

478. EFFECT OF QUARRY DUST ON THE ENGINEERING PROPERTIES OF LATERITIC SOILS

479. EFFECT OF GROUNDNUT SHELL ASH ON SOIL STABILIZATION

480. THE EFFECTIVENESS AND OBSTRUCTS OF SANDCRETE AND CONCRETE BLOCK IN A FOUNDATION SYSTEM. civil engineering project topics

481. CONSTRUCTION OF PAVING STONES AND ITS INSTALLATION AT THE FRONT OF FACULTY OF ENGINEERING

482. QUALITY AND IMPROVEMENT OF BEARING CAPACITY OF SANDY SOIL BY GROUTING

483. ENVIRONMENTAL IMPACT OF LEACHATE POLLUTION OF GROUND WATER SUPPLIES

484. RESIDENTIAL BUILDING COLLAPSE IN NIGERIA: CAUSES, EFFECTS AND SOLUTIONS

485. THE ROLE OF VOCATIONAL TRAINING IN BRIDGING SKILL GAP IN THE BUILDING INDUSTRY OF NIGERIA

486. THE ROLE OF PRIVATE PARTNERSHIP IN HOUSING FINANCE, DELIVERY AND MAINTENANCE IN NIGERIA

487. THE ROLE OF THE CBN IN ENSURING AFFORDABLE HOUSING FOR NIGERIANS

488. THE ROLE OF THE FEDERAL GOVERNMENT IN SOLVING HOUSING DEFICIT IN NIGERIA, civil engineering project topics

489. CAUSES OF CONSTRUCTION PROJECT FAILURES AND ABANDONEMTS IN NIGERIA

490. CAUSES AND EFFECTS OF ABANDONED RESIDENTIAL PROPERTIES (A CASE STUDY OF BENIN CITY)

491. ISSUES AND CHALLENGES IN THE EXECUTION OF PUBLIC SECTOR HOUSING PROJECTS IN NIGERIA

492. ASSESSMENT OF FACTORS AFFECTING CONTRACTORS TENDER FOR CONSTRUCTION PROJECTS IN NIGERIA

493. AN INVESTIGATION INTO DESIGN ERRORS AND IT IMPACT ON INITIAL COST OF A CONSTRUCTION PROJECT, civil engineering project topics

494. THE IMPACT OF COST CONTROL TECHNIQUES ON DELIVERY OF CONSTRUCTION PROJECTS IN NIGERIA

495. THE IMPACT OF EFFECTIVE CONTRACT PLANNING ON CONTRACTORS PROFIT ( A CASE STUDY OF JULIUS BERGER, UYO OFFICE)

496. THE EFFECT OF TIMELY DELIVERY OF CONSTRUCTION PROJECTS ON THE ECONOMIC DEVELOPMENT OF NIGERIA ( A CASE STUDY OF SOME SELECTED PROJECT SUPERVISORS IN JULIUS BEGER PLC AND MARLUM CONSTRUCTION COMPANY)

497. THE PROSPECT OF HUMAN RESOURCE MANAGEMENT IN ENHANCING HIGHER PRODUCTIVITY IN A CONSTRUCTION COMPANY

498. IMPACT OF THE 2007 PROCUREMENT ACT ON ACCOUNTABILITY OF OFFICERS IN THE PUBLIC SECTOR OF NIGERIA

499. THE EFFECT OF MOTIVATION OF LABOUR, COST AND PRODUCTIVITY ON NIGERIAN CONSTRUCTION INDUSTRY. civil engineering project topics

500. AN INVESTIGATION INTO RISK MANAGEMENT PRACTICES AMONGST QUANTITY SURVEYORS IN THE CONSTRUCTION INDUSTRY OF NIGERIA

501. THE IMPACT OF PROCUREMENT SYSTEMS ON CONSTRUCTION COST AND DELIVERY

502. ANALYSIS OF THE IMPACT OF FEASIBILITY/VIABILITY STUDY ON CAPITAL PROJECT DEVELOPMENT IN NIGERIA. civil engineering project topics

503. ASSESSMENT OF THE IMPACT OF WORK ENVIRONMENT ON THE PRODUCTIVITY OF CONSTRUCTION SKILLED WORKERS IN IMO STATE, NIGERIA

504. APPLICATION OF GEOINFORMATICS TECHNIQUES IN CONTROLLING FLOOODING IN VULNERABLE ROADS AND BUILDINGS IN NIGERIA

505. THE ROLE OF LEGAL ASSESSMENT ON TENDER OF CONTRACTS IN NIGERIA

506. AN ASSESSMENT OF THE EFFECT OF ORGANIZATIONAL CULTURE ON THE PERFORMANCE OF QUANTITY SURVEYING FIRMS IN NIGERIA. civil engineering project topics

507. SOIL BEARING CAPACITY IN IMO STATE (A CASE STUDY OF A SELECTED COMMUNITY IN EACH GEO-POLITICAL ZONE OF THE STATE)

508. ASSESSEMENT OF OTAMIRI WATER QUALITY FOR & AGRICULTURAL AND EOMESTIC USES

509. EVALUATION OF BEARING CAPACITY OF SOIL LAYERS.  A CASE STUDY OF OWERRI FEDERAL CONSTITUENCY

510. SCHOOL OF ENGINEERING TECHNOLOGY DESIGN OF ANTI – EROSION STRUCTURE TO CONTROL  GULLY EROSION AT AMUZUKWU IBEKU, UMUAHIA, ABIA STATE.

511. UNDERGROUND RESERVOIR IN NIGERIA: PROBLEM AND PROSPECTS (A CASE STUDY OF SOUTH-EAST GEOPOLITICAL ZONE)

512. CONSTRUCTION OF PANEL DOOR

513. CONSTRUCTION OF ALUMINIUM/GLASS WINDOW

514. COMPARING THE COMPRESSIVE AND FLEXURAL STRENGTH OF CONCRETE MADE WITH RIVERSAND AND QUARRY DUST AS FINE AGGREGATE

515. CONSTRUCTION OF A WOODEN BOOKSHELF

516. INSTALLATION OF DOORS, WINDOW AND BURGLARY PROOF TO WORKSHOP

517. CONSTRUCTION OF ALUMINIUM/GLASS WINDOW

518. RELEVANCE OF COMPUTER EDUCATION IN THE TWENTY FIRST CENTURY

519. CONSTRUCTION OF TRESTLE SCAFFOLD

520. CONSTRUCTION OF PANEL DOOR

521. CONSRUCTION OF WOODEN WARDROBE

522. COMPARISON OF WATER QUALITY FROM RIVERS, STREAMS AND BOREHOLES IN EBONYI STATE (A CASE STUDY OF ISHIAGU, AKA-EZE, AMASIRI AND OKPOSI)

523. COMPARISON OF WATER QUALITY FROM RIVERS, STREAMS AND BOREHOLES IN EBONYI STATE (A CASE STUDY OF ISHIAGU, AKA-EZE, AMASIRI AND OKPOSI)

524. ANALYSIS, DESIGN AND DETAILING OF THREE STORY HOTEL BUILDING (USING BS 8110) AT EZINIHITTE MBAISE IN IMO STATE OF NIGERIA

525. CONSTRUCTION OF WOODEN BOOKSHELFE USING WOOD AS A CONSTRUCTION MATERIAL

526. INVESTIGATION INTO THE CAUSES OF GULLY EROSION IN IDEATO AREA AND SOLUTION

527. DESIGN AND DETAILING OF TWO – STOREY SHOPPING PLAZA

528. CONSTRUCTION OF BOOKHELF. IN WOODEN FORM

529. COMPARING THE COMPRESSIVE STRENGTH OF CONCRETE MADE WITH SAND AS FINE AGGREGATE AND MADE WITH CHIPPING DUST AS FINE AGGREGATE

530. DESIGN AND CONSTRUCTION OF DUAL–POWERED HEAT TREATMENT FURNACE

531. TRANSIENT HEAT CONDUCTION IN A SOLIDIFYING ALLOY

532. WATER PUMPING STATION INSTALLATION UPGRADE

533. DESIGN AND INSTALLATION OF CATHODIC PROTECTION SYSTEM USING ZINC ANODE

534. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING

535. THE DESIGN AND FABRICATION OF MECHANICAL LAWN MOWER

536. REPAIR OF AN AIRCONDITIONER IN MECHANICALENGINEERING DEPARTMENT

537. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE

538. FABRICATION OF METAL SHELF Mechanical Engineering Project

539. CONSTRUCTION OF A MOBILE REFRIGERATORFRIDGE

540. DESIGN AND FABRICATION OF A METAL BOOKSHELF

541. DESIGN A ND FABRICATION OF A DUST EXTRACTOR

542. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

543. THE CONSTRUCTION AND FABRICATION OFA METAL BOOKSHEET

544. DESIGN AND FABRICATION OF A PILOT PRODUCTIONPLANT FOR PAINTS (EMULSION AND TEXCOAT) Mechanical Engineering Project

545. DESIGN AND CONSTRUCTION OF A SPIN DRYER

546. REPAIR AND REHABILITATION OF A FAULTY AIRCONDITION

547. DESIGN AND CONSTRUCTION OF A WOODLATHEMACHINE

548. REPAIR OF A DAMAGED REFRIGERATOR

549. THE DETAIL FABRICATION OF A CANDLE MOULDING MACHINE

550. DESIGN AND CONSTRUCTION OF BAKING OVEN  Mechanical Engineering Project

551. CONSTRUCTION OF TWO FACE GAS BURNER

552. FABRICATION OF A FOLDABLE CAMP BED

553. DESIGN AND FABRICATION OF MODERN LOCKABLE BOOKSHELF

554. CONSTRUCTION OF A STANDARD BANKING OVENWITH DUAL POWER SOURCE (ELECTRIC/GAS) Mechanical Engineering Project

555. THE DESIGN AND CONSTRUCTION OF A HOT PRINTINGMACHINE

556. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

557. THE DESIGN AND FABRICATION OF A IRON SHELLING MACHINE

558. CONSTRUCTION OF GRAIN GRINDING MACHINE

559. AN ELECTRIC POP-CORN MACHINE

560. DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF

561. CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG VALVE BUS

562. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN

563. INSTITUTE OF MANAGEMENT AND TECHNOLOGY ENUGU CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR

564. DESIGN AND FABRICATION OF CHILDREN SWING

565. DESIGN AND FABRICATION OF MOBILE DEEP FREEZER

566. DESIGN AND FABRICATION OF A PRINTING /BLOCK MACHINE

567. DESIGN AND FABRICATION A CORN SHELLING MACHINE

568. FABRICATION OF A FOLDABLE CAMP BED

569. REFURBISHING OF MECHANICAL ENGINEERING DRAWING STUDIO

570. DESIGN AND RABRICATION OF MODERN LOCKABLE BOOKSHELF

571. CONSTRUCTION OF A STANDARD BANKING OVEN (MINI-OVEN) WITH DUAL POWER SOURCE (ELECTRIC/GAS)

572. DESIGN AND CONSTRUCTION OF A MODERN NAIL GASKET MACHINE

573. THE DESIGN AND CONSTRUCTION OF A HOT PRINTING MACHINE

574. CONSTRUCTION OF TWO FACE GAS BURNER

575. REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING DEPARTMENT

576. DESIGN AND FABRICATION OF BASIC STATIC AND DYNAMIC BALANCING MACHINE

577. DESIGN AND CONSTRUCTION OF A SPIN DRYER

578. DESIGN OF MELON DE-HUSKING AND SEPARATION MACHINE

579. DESIGN A ND FABRICATION OF A DUST EXTRACTOR

580. CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

581. THE CONSTRUCTION AND FABRICATION OF A METAL BOOKSHELF

582. DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)

583. DESIGN AND CONSTRUCTION OF A WOODLATHE MACHINE

584. REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION

585. DESIGN AND FABRICATION OF CORN SHELLING MACHINE

586. DESIGN AND FABRICATION OF A PALM FRUIT DIGESTER

587. DESIGN AND FABRICATION OF A CREEP TESTING EQUIPMENT 

588. DESIGN AND FABRICATION OF A 12M3 MOBILE DEEP FREEZER

589. DESIGN AND CONSTRUCTION OF PUNCH AND DIE FOR PRODUCTION OF CUPS

590. DESIGN AND FABRICATION OF WOOD LATHE MACHINE

591. THE FABRICATION OF A SINGLE FACE PRESSURIZED KEROSENE COOKER

592. FABRICATION OF BENCH SHEARING MACHINE

593. FABRICATION OF BENCH SHEARING MACHINE

594. CONSTRUCTION OF A MOBILE REFRIGERATOR

595. REPORT ON CONSTRUCTION OF NYLON SEALING AND CUTTING MACHINE

596. REPAIR AND MAINTENANCE OF A FAULTY DEEP FREEZER IN THE DEPARTMENT OF MECHANICAL ENGINEERING

597. REPAIR OF AN AIRCONDITIONER IN MECHANICAL ENGINEERING DEPARTMENT

598. FABRICATION OF A POLYTHIENE BAG SEALING AND CUTTING MACHINE

599. CONSTRUCTION OF STEEL SHELF

600. THE DESIGN AND FABRICATION OF A CANDLE MOULDING MACHINE

601. THE CONSTRUCTION AND FABRICATION OF A CANDLE MOULDING MACHINE

602.  THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE USING FREQUENCY MODULATION (FM) WITH POWER RATING OF 1 WATT

603. CONSTRUCTION OF CELLOPHANCE SEALING MACHINE

604. CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE

605. THE DESIGN AND FABRICATION OF MECHANCIAL LAWN MOWER

606. CONSTRUCTION OF METAL SHARPENING AND DULLING DEVICE

607. DESIGN AND CONSTRUCTION OF JOURNAL BEARING DEMONSTRATION RIG

608.  DESIGN AND CONSTRUCTION OF MITCHELL TILTING PAD APPARATUS

609. THE FABRICATION OF A PRESSURIZED KEROSENE OVEN

610.  FABRICATION OF A POLYETHYLENE BAG SEALING AND CUTTING MACHINE

611.  FABRICATION OF A FOLDABLE CAMP BED

612.  FABRICATION OF A STANDARD WHEELBARROW

613.  DESIGN AND FABRICATION OF A PRINTING / BLOCK MACHINE

614.  FABRICATION OF METAL SHELF

615.  DESIGN AND FABRICATION OF WOOD LATHE MACHINE

616.  DESIGN AND FABRICATION OF A DUST EXTRACTOR

617.  DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR

618.  DESIGN AND CONSTRUCTION OF A SPIN DRYER

619.  DESIGN AND FABRICATION OF A PILOT PRODUCTION PLANT FOR PAINTS (EMULSION AND TEXCOAT)

620.  CONSTRUCTION OF TWO FACE GAS BURNER

621.  DESIGN AND CONSTRUCTION OF BAKING OVEN

622.  DESIGN AND CONSTRUCTION OF A METALLIC BOOK SHELF

623.  CONSTRUCTION OF STEEL CUPBOARD

624.  CONSTRUCTION OF SHELL AND TUBE HEAT EXCHANGER

625.  CONSTRUCTION OF PROPELLER AGITATOR

626.  CONSTRUCTION OF GRAIN GRINDING MACHINE

627.  REPAIR OF STOP CLOCKS

628.  CONSTRUCTION OF INDUSTRIAL WHEEL BARROW

629.  CONSTRUCTION OF PACKED DISTILLATION COLUMN

630.  CONSTRUCTION OF FLOW NOZZLE

631.  CONSTRUCTION OF A SCREW CONVEYOR WITH A SINGLE PHASE ELECTRIC MOTOR

632.  DESIGN AND CONSTRUCTION OF A REFRIGERATING UNIT

633.  CONSTRUCTION OF A MOBILE REFRIGERATOR FRIDGE

634.  CONSTRUCTION OF AN ELECTRICAL STOVE WITH THREE-OVEN APARTMENT

635.  FABRICATION OF THE A METALLIC BOOKSHELF

636.  CONSTRUCTION OF BOOK SHELVE

637.  REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION

638.  REPAIR AND REHABILITATION OF FAULTY AIR CONDITIONER

639.  REPAIR AND FABRICATION OF A REFRIGERATOR SYSTEM

640.  REPAIR AND REHABILITATION OF A FACULTY REFRIGERATOR

641.  THE DETAIL FABRICATION OF A CANDLE MOLDING MACHINE

642.  CONSTRUCTION OF A STEEL CUPBOARD

643.  CONSTRUCTION OF A STANDARD DRAWING DESK

644.  CONSTRUCTION OF A MOBILE REFRIGERATOR

645.  THE CONSTRUCTION AND FABRICATION OF BENCH SHEARING MACHINE

646.  REPAIR AND REHABILITATION OF A FAULTY DEEP FREEZER

647.  REPAIR OF A FAULTY REFRIGERATOR

648.  REPAIR OF DEEP FREEZER IN MECHANICAL ENGINEERING

649.  NYLON CUTTING AND SEALING MACHINE

650.  THE CONSTRUCTION AND FABRICATED OF A MOBILE DEEP FREEZER

651.  THE CONSTRUCTION OF SIEVE EQUIPMENT

652.  THE CONSTRUCTION AND FABRICATION OF A CANDLE MOLDING MACHINE

653. AUTOMOBILE MOTOR VEHICLE CONSTRUCTION

654.  CONSTRUCTION OF A POTABLE ELECTRIC OPERATED WITH RADIO CONTROL (WIRELESS REMOTE) MOTOR VEHICLE FOR LONG DANZA BUS

655.  AN ELECTRIC POP-CORN MACHINE

656.  THE DESIGN AND FABRICATION OF AN ELECTRIC POPCORN FRYING MACHINE

657.  THE FABRICATION FOR A SET OF SIEVES AND SAKE