The effect of vegetable oil biodiesel on the tissues of an albino-rat (rattus novergicus)

  • Ms Word Format
  • 79 Pages
  • ₦3000
  • 1-5 Chapters

THE EFFECT OF VEGETABLE OIL BIODIESEL ON THE TISSUES OF AN ALBINO-RAT (RATTUS NOVERGICUS)

TABLE OF CONTENT

Chapter One

1.0              Introduction

1.1       Problem statement

1.2              Aims and objectives of the project

Chapter two

2.0              Literature Review

2.1       Origin of foam

2.2              Structure of polyurethane

2.3              Properties of polyurethane foam

2.4              Classification of polyurethane

2.5              Flexible foam

2.6              Rigid foam

2.7              Basic chemistry of foam production

2.8              Polyurethane chemicals and functions

2.8.1        Man chemicals

2.8.2        Blowing agents

2.8.3        Catalyst

2.9              Foam stabilizers

2.10          Making / Agitation

2.11          Characteristic features of methyl come chloride

2.12          Some possible faults, causes and their remedies.

2.13          Characteristics of fibre foams

2.14          Physical properties of foam polyurethane

2.15          Thermal properties of polyurethane foams

2.16          Foam fibres applications

2.17          Factors that causes defect during process

Chapter three

3.0              Foam formulation

3.1       The roles of chemicals in foaming reactors

3.2              Determination of Chemical consumption rates

3.2.1        Water

3.2.2        Tohiene DI – Isocyate

3.2.3        Blowing Agents

3.2.4        Schlone

3.2.5        Amine

3.2.6        Stannous actuate

3.2.7        Colorant

3.3              Summary  of the formulation

Chapter four

4.0              Production procedure / Analyses

4.1       Essential Raw Materials Used

4.2              Procedures / methods

4.3              Experimental Results / Analysis

4.4              General Thermal properties

4.5              Chemical properties

4.6              Optical properties

4.7              Electrical properties

4.8              Permanence and service properties

4.9              Characteristic Test

4.10          Sampling and conditioning

4.11          Storage and Handling of urethane raw materials

Chapter five

5.0              Discussion

Chapter six

6.0              Conclusion

6.1       Recommendation

6.2              Cost Analysis

6.3              References

0 Shares:
Leave a Reply

Your email address will not be published. Required fields are marked *

You May Also Like